I am attempting to use the "PIC Elmer 160 Course" as referenced on the new user FAQ. My problem is every time I try to build the code I get an Error 152 on lines 5 thru 9. Error 152 tells me: "Executable code and data must be defined in an appropriate section"  
   
  I looked the error up in Chapter 8 of the Assembler,Linker/Librarian User Guide and it tells me that "When generating an object file, all executable code and data declarations must be placed within appopriate sections". I am using MPLAB 7.43 (what I downloaded from the Microchip web site) an installed it on my computer which runs Windows XP. I am using the Microchip 16F84.lnk . 
   
  The code is as follows:
   
  1.   Processor 16F84
  2.   include <p16f84.inc>
  3.   __config _HS_OSC & _WDT_OFF & _PWRTE_ON
  4.  spot1   equ   H'30'
  5.  movlw   D'5'
  6.  movwf   spot1
  7.  clrw
  8.  clrf   spot1
  9.  nop
  10. end
   
  Please tell me what I am missing? I have been working on this problem for several days now.
   
  Thanks, Ed

 
---------------------------------
Want to start your own business? Learn how on Yahoo! Small Business.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist