On 11/8/06, Richard Prosser wrote: > > Mohit, > You may not be able to use them at all. As they are wound as common > mode, if you don't run the dc current though them in both directions > (i.e. go and return), they are likely to saturate and present a much > lower effective inductance. If you are running a lot less than 10A you > could try it by just using one winding - or connecting both windings > in parallel but connected so that both winding "starts" are connected > to the same point - if that makes sense. That, plus the ferrite may be too lossy at the operating frequency. -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist