Mohit,
You may not be able to use them at all. As they are wound as common
mode, if you don't run the dc current though them in both directions
(i.e. go and return), they are likely to saturate and present a much
lower effective inductance. If you are running a lot less than 10A you
could try it by just using one winding - or connecting both windings
in parallel but connected so that both winding "starts" are connected
to the same point - if that makes sense.

RP


On 08/11/06, Mohit M. (Lists) <mohit.lists@gmail.com> wrote:
> I had intended to buy 1mH, 10A inductors but have mistakenly ordered
> and received common mode chokes of the same specs. I am not very
> familiar with these and Google hasn't also helped much (probably
> haven't used the right search terms).
>
> Can I use these chokes as inductors?
> If yes, how? Like (a) connecting one winding and leaving the other
> open or (b) paralleling both.
>
> Thanks,
> Mohit.
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist