In SX Microcontrollers, SX/B Compiler and SX-Key Tool, stef wrote:

Hi

Thanks to the person that filled in my topic header. It was late for me laste night and I forgot to fill it in.

Thanks Guenther and peter for the help. I swapt my project to use an external resonator.

Now I can compile and run it but I get the wrong data true the serial. Not to panic. It will be some stupid thing i do wrong so let me lern a bit by searching for the problem. Perhaps you see that I 'm the same guy from a few days ago at the javeline forum that wants to read WIEGAND. I swaped over to sx but now I need to lurn a bit. I'm not used to this PIC.

Nevertheless, it is already working for reading data. I have it on my desk with a liddle led flashing when it is getting valid data. 

Thanks again fur the useful information.

I hope to post it when it is finisched so I can help others with it but that I want to do when it is finisched.I need to implement some other stuff also. Reading not only 26 bit wiegand but also sending wiegand out, reading as high as 50 bit, autodetekt bitlengt, sitecode place, issuecode place, cardnumber pllace, ecc...

Also I hope to implement an other protocol called clock and data. Ofthen used by magnetic cardreaders. I also like to implement reading and sending that protocol. Any sugestion????

As you can imagin I worke for a security integrater company.

Stef

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=153698#m153791

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)