Why don x-ray the board and do less probing? For
multilayer 4> x-ray may not be a good option.

John

--- Ray Newman <list@microdesigns.biz> wrote:

> Boy do I wish there was.
> I have done the same from time to time  to "follow
> all the traces with a multimeter to make the
> =A0schematic" .
> Not easy but it all depends on how many parts and
> hopefully
> ALL the parts are labeled.
> Hopefully you can charge the customer enough to make
> it worth your time.
> =

> Ray
> =

> =

> =

> On Sun, 5 Nov 2006 17:43:36 -0300, Mauricio Jancic
> wrote:
> >=A0Hi,
> >=A0I have two boards from a customer who wants me to
> produce identical
> >=A0replacements. This are 10+ years old boards
> (Stepper controller)
> >=A0with a bunch of logic, comparators, and some other
> parts. No
> >=A0microcontrollers.
> >
> >=A0I would like to know if there is a set of tools
> available to
> >=A0reproduce as exactly as posible a board, in order
> not to have to
> >=A0follow all the traces with the multimeter and the
> make the
> >=A0schematic.
> >
> >=A0Any ideas?
> >
> >=A0Regards,
> >
> >=A0Mauricio
> =

> =

> =

> =

> > -- =

> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> =





 =

___________________________________________________________________________=
_________
Sponsored Link

Mortgage rates near historic lows: =

$150,000 loan as low as $579/mo. Intro-*Terms =

https://www2.nextag.com/
-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist