Hi,

I have a problem in founding the right PMIC for my application.
The best PMIC which approximatively met the requirements is LP3971:
http://www.national.com/ds/LP/LP3971.pdf
It has 3BUCKs and 6LDO's. Unfortunately, the voltages which are
factory settings are too large or in different configuration than I
need (no one from the three versions available). Even if almost all
LDO's and BUCKs are programable via I2C, the startup voltage
configuration is wrong.
I can't use an auxiliary microcontroller for power-up reconfiguration,
so forget this
solution.

Now finally the question: do you know any similar product with LP3971 ?
(3 BUCKs programable between 1V and 3V at minimum 1.3A, 4 LDO's
programable between 1V and 3.3V at 150mA or lower , 1LDO programable
between 3V and 3.4V at 370mA)


thank you,
Vasile
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist