How much amper they take?

Tamas


On 22/10/06, Gerhard Fiedler <lists@connectionbrazil.com> wrote:
>
> Austin wrote:
>
> >> everything I've seen was way too heavy, way too strong and most of it
> >> also way too expensive. But there probably are some in the range I'm
> >> looking for -- "just" a matter of finding them :)"
> >
> > ATV winches.
> >
> > One site I came across with a few specs:
> > http://www.gorillawinches.com
>
> Thanks for the pointer. What I saw was not encouraging, though...
>
> http://tinyurl.com/y84se9 : At $130 that could almost fit into the budget,
> 6 kg might be bearable. The data provided was not too extensive, other
> than
> that it is a 1 hp (750 W) motor. That is plenty for my application,
> actually quite an overkill. I found a bit more data for a sister-winch:
>
> http://tinyurl.com/upxjm : Here they have a load/speed table. I don't know
> the spool diameter, but I estimated with at least 10 cm. This gives an
> idle
> speed of max. 22 rpm -- which is too slow. Probably there are not many
> winches that are much faster: I'd need it around 80 rpm, four times the
> speed.
>
> Am I wrong with this estimation? Are there winches that rotate at 80 rpm?
> I
> don't have a lot of experience with ATV winches.
>
> Thanks,
> Gerhard
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



-- 
unPIC -- The PIC Disassembler
http://unpic.sourceforge.net
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist