In SX Microcontrollers, SX/B Compiler and SX-Key Tool, John Kauffman wrote:

I'm curious. TUt01.SRC had:

; TUT001.SRC
; ===============================================================================
LIST Q = 37
Device	SX28L, TURBO, STACKX, OSCHS2, optionx
IRC_CAL IRC_FAST
FREQ	50_000_000

But JSwinn said there was no resononator. 
With no resonator shouldn't the freq be 4_000_000 and timing directive of OSC4MHZ?
With the timing commands wrong, I would expect the debug result of walk disabled.

As I read, his debugging is working with downloaded file from Parallax. 
JSWinn: did you get your TuT01 file to debug?
Would his debugger work with the (wrong) timing directives as posted int TUT01?? Or am I getting something wrong?

Thanks.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=150536#m150870

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)