>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>Sent: 13 October 2006 21:49
>To: Pic List
>Subject: [PIC] PM3 socket modules work in PM2?
>
>
>resend with tag!
>
>
>I need to program some qfn20 chips. I see a socket module 
>(AC164326) that will do this on a ProMate 3. We have a ProMate 
>2 (and a ProMate 1). Does this socket module fit the PM2?
>
>Thanks!
>
>Harold

AFAIK they are not compatible.  I don't have any modules for our PM3, but the connectors are totaly different. The PM3 uses proper connectors whereas the PM2 uses extremely unreliable zebra strips and gold flashed pads on the PCBs of the module and programmer.

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist