Hi Jan-Erik, On 10/6/06, Jan-Erik Soderholm wrote: . > Just got a question from someone who was trying to flash a > PIC18F2685 using his Wisp628 (1.10 firmware) using XWisp2. > He gets some errors that *looks* communications error > between the Wisp628 and the target, but I=E4m not sure. > > Anyway, > > The 2685 device is not in the list of suported devices > but the 2680 is. It seems as the diff is a larger prog mem > (64kb in the 2680 vs. 94kb in the 2685). > > The 2685 shares the same Prog Spec as a lot of other > supported PIC18 devices. > > Now, is there any obvious reason the 2685 would not > work with this setup ? I just added this one and three similar ones to xwisp_16.cfg. For the 2865 I have specified: Name =3D 18F2685 DataSheet =3D DS39761 PgmSpec =3D DS39622 Algorithm =3D PIC18A DeviceID =3D 2720 ProgSize =3D 96K DataSize =3D 1024 ProtectMask =3D C03F WriteBurst =3D 64 FuseFixedZero =3D 00CF1F1F0086F5003FC03FE03F40 I couldn't test it yet, I've no such PIC here yet, but I think it should work like any of the others of this group. However I noticed a minor change in the programming algorithm (for the Wisp628 firmware) for all members of this large group (38 PICs). This might be the cause of errors for this PIC. Note: Wisp628 firmware version 1.11 is the most recently published, I'm working on firmware 1.12.... have some patience! Regards, Rob PS: Did my message about a "Users Guide and Command Reference for Xwisp2" come through here? I didn't receive my announcement message back from PIClist. See http://www.robh.nl/xwisp2.html or the llink within http://www.robh.nl/picsoft.php#xwisp2. -- = Rob Hamerling, Vianen NL (http://www.robh.nl/) -- = http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist