Binu Pillai wrote:

>  
>yeh baud was checked it was fine too
>  
>
ok now check the protocol,
tie 2 commports to the Tx and Rx lines
and watch with something like hypertirminal what's happening.
Stef

>On Wed, 04 Oct 2006 stef mientki wrote :
>  
>
>>>yes i loaded a programme to transmitte 1,2,3....increasing order after every second.
>>>and another program that sends out 79 when i trasmit 24 from the PC
>>>to test both RX and TX
>>>
>>>      
>>>
>>did you check at the same baudrate as the bootloader is working ?
>>did you try to send/receive complete strings ?
>>    
>>
>>>one board it starts then says time out. for all the attempts i made.
>>>in all other board "searching for bootloader"
>>>
>>>      
>>>
>>Could be a bad baudrate ...
>>See my questions above.
>>Stef
>>
>>--
>>http://www.piclist.com PIC/SX FAQ & list archive
>>View/change your membership options at
>>http://mailman.mit.edu/mailman/listinfo/piclist
>>    
>>

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist