Barry Gershenfeld <barry_g <at> zmicro.com> writes:

> 
> (Re-sent, with PIC header)
> I am having trouble with my ICD2, not unlike Shawn's troubles, but I think 
> my problem's different.  For one thing, I'm working with 18F chips rather 
> than 12F.  For another, this thing used to work.  I'll go into details 
> shortly, but I'm thinking I should try whatever signal conditioning tricks 
> as may have been recommended in the past (and which I never needed 
> then).  I can't seem to turn up much by searching.
>

I had similar problem with ICD2 and CCS' ICD-U40, all the works as you 
described it.  The solution I found was to uninstall windows drivers, reboot 
computer and re-install drivers.  It works great after that, until 
windows "looses its mind" again.

Good luck,


Sergey Dryga
http://beaglerobotics.com




-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist