Yeah, now that I understand what you're saying, I'll give it a shot this
evening.  Thank you.


> PART B: The 8 pins that are mapped to emulate the actual F675.  For
> this part to work, you have only one option regarding the
> configuration of the MCLR.  It must be configured as MCLR. Not a true
> MCLR as some of its responsibility (Vpp) has been taken by PART A
> (~ICDMCLR),    BUT it must still be pull-up to Vdd, as you did with a
> normal PIC's MCLR.  Without that the PIC won't run, and the ICD2
> communication can't be established. Can you just find a 10k resistor
> and connect it to the header to perform the test.  It sould be joint
> to pin 3 and pin 6 of the -ICD.  You can find the PCB trace and join
> it at the top side of the PCB.  Or connect the 10k resistor at your
> target and plug the header in.
>



-- 

Shawn Wilton (b9 Systems)
http://b9Systems.com  <- New web page
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist