=A0
Sorry jan
    everything fine ment as far as h/d is concerned everything is fine. and=
 i suppose if it is possible to communicate through the UART it should be p=
ossible to bootload through the same UART. The only change is the Package..=
.I have made 6 boards and none of them have responded to the Bootloading wh=
en i tried.

binu

On Tue, 03 Oct 2006 Jan-Erik Soderholm wrote :
>Binu Pillai wrote :
>
> > Hello
> > bootloader hex was loaded...
> > uart works fine...
> > manually resetted...
> > everything fine...
> > infact i had done this so many times with the other DIP package.
>
>OK, fine.
>So what is the difference between your DIP and your SMD
>design then ?
>
>(You might want to try to express yourself a little more
>clearly, one could read your post as if "everything fine"
>*when* it's "manually resetted". But I'm not sure that
>that was what you ment...)
>
>B.t.w, exactly what *is* "everything" in "everything fine" ??
>
>Jan-Erik.
>
>
>
>--
>http://www.piclist.com PIC/SX FAQ & list archive
>View/change your membership options at
>http://mailman.mit.edu/mailman/listinfo/piclist
-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist