OK, my ICD has arrived, and I'm trying to figure out how to hook the darn
thing up.  I can't find the docs needed to hook the ICD header for the
pic12f675 to my application.

Nor can I figure out how to program my application.  I found some app notes
that say you can't program when using the header, but you need the header to
debug.  So since I program my application through a custom firewire cable, I
suppose I will need two interface cables?  One for debug, and another for
programming since one will have to use the header and the other will not?

Am I correct in my assertions?



On 9/20/06, John Chung <kravnus@yahoo.com> wrote:
>
> Thanks for the info
>
> John
>
> --- WH Tan <whsiung.my@gmail.com> wrote:
>
> > 2006/9/20, John Chung wrote:
> >
> > >   Calibration data? Not sure what is that and
> > ICD2...
> >
> > There are 2 kinds of calibration data in PIC12F675.
> > All are
> > preprogrammed in factory.
> >
> > 1) Bandgap (2 bit) located in configuration
> > register.
> >
> > 2) OSCCAL value located at last ROM address (0x3FF),
> > in the form of
> > RETLW XX, where XX is the calibration value for the
> > internal
> > oscillator.
> >
> >
> > Best regards,
> >
> > --
> > WH Tan
> > --
> > http://www.piclist.com PIC/SX FAQ & list archive
> > View/change your membership options at
> > http://mailman.mit.edu/mailman/listinfo/piclist
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



-- 

Shawn Wilton (b9 Systems)
http://b9Systems.com  <- New web page
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist