Excellent...and its pretty cheap as well. Michael Rigby-Jones wrote: >-----Original Message----- >From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] >Sent: 25 September 2006 15:43 >To: Microcontroller discussion list - Public. >Subject: [EE] 1.25V @ 300mA > > >Short of doing a full blown switcher, rather do just an LDO >and feed from my 3.3V or 2.5V source I have. Years ago, I had >used a part that was designed to be a DDR termination voltage, >where you give it a reference and it drives out half that >reference but I can't find the part now. > > So, anyone know of an LDO that can give half the reference >voltage on its output? http://www.fairchildsemi.com/pf/FA/FAN1655.html Regards Mike ======================================================================= This e-mail is intended for the person it is addressed to only. The information contained in it may be confidential and/or protected by law. If you are not the intended recipient of this message, you must not make any use of this information, or copy or show it to any person. Please contact us immediately to tell us that you have received this e-mail, and return the original to us. Any use, forwarding, printing or copying of this message is strictly prohibited. No part of this message can be considered a request for goods or services. ======================================================================= -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist --------------------------------- Get your email and more, right on the new Yahoo.com -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist