>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>Sent: 25 September 2006 15:43
>To: Microcontroller discussion list - Public.
>Subject: [EE] 1.25V @ 300mA
>
>
>Short of doing a full blown switcher, rather do just an LDO 
>and feed from my 3.3V or 2.5V source I have.  Years ago, I had 
>used a part that was designed to be a DDR termination voltage, 
>where you give it a reference and it drives out half that 
>reference but I can't find the part now.
>   
>  So, anyone know of an LDO that can give half the reference 
>voltage on its output?

http://www.fairchildsemi.com/pf/FA/FAN1655.html

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist