Olin Lathrop wrote :

> Parts of the firmware would probably have to be
> jettisoned since support for all PIC types doesn't
> fit into the 16F648A of a EasyProg either.  There are
> assembly time switches in the firmware just for
> that purpose.

*Only* support for dsPIC30xxxx would be fine enough.

> Of course you could just get a EasyProg and save
> yourself a lot of porting work.

My goal would be to be able to offer a simple/low-cost
dsPIC30 solution to those who *already* have bought
the Wisp628 from me.


Wouter wrote :

> you should check the Vpp requirements of those chips first,
> Wisp628 has a very simple Vpp generator. But you could
> switch of one stage of the Vpp pump, so you'd get ~8V.

Thanks, that's the kind of info I was looking for... :-)

Best Regards,
Jan-Erik.



-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist