Jinx schrieb:
> Hi Tobias
>
> Have a look at this page
>
> http://www.piclist.com/techref/microchip/picstartplusicsp.htm
>
> I program SMT PICs from 12F675 to 18F4550 with the PS+. It
> will work with any PIC if you disconnect the PIC from the circuit
> by switching (I use rotary). The PS+ is not designed to put out a
> lot of power and cannot drive a circuit. If you can make the ICSP
> pins (PB6, PB7) free that will make things simpler. I can usually do
> this with the larger PICs. You can then use the circuit 0V and 5V
> and need only manipulate MCLR. I've found that 50k-100k is OK
> for a fixed pull-up, with PS+ MCLR coming in through a Schottky
>
>   
i just looked at microchip help   picstart does not support the 18f6621 
device so i have a problem. the 18f6620 is.

now i ve got a big problem
any hints?


tobi

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist