----- Original Message ----- From: "Rob Hamerling" To: "Microcontroller discussion list - Public." Sent: Tuesday, September 19, 2006 5:01 PM Subject: Re: [PIC] pogram upload, again > On 9/19/06, Frank Abbing wrote: > >> I got, as suggested, the WISP628 kit. I put it together and it seems to >> do something. I try to program an 18F4520, using Bumblebee. >> Bumblebee reports correctly the WISP and the target PIC >> >> It seems to upload my hexfile >> >> What happens then is that verify reports 00 at the first location, this >> should be 0x90. Verifying stops after one error, but downloading the >> code shows that there are only 00 bytes. > > Which firmware version has your Wisp628? I believe VOTI ships 'm with > version 1.09, which does not support the 18F4520. You'll need version > 1.10 or 1.11, available on my site as part of the Xwisp2 package. > I came across your site while searching for a solution. Wouter also points me in the same direction, it seems this is the way to go. Frank Abbing -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist