On Sep 18, 2006, at 9:34 AM, CSB wrote:

>
> Watch out for DIP ICs. Mirror those, and the difference isn't
> visible unless you already have some traces connecting it.

If there's some form of pin 1 marking the difference will be
visible, but perhaps not obvious.  If there are text markings
for the DIP, those will move to bNames/bValues as well, and
show up as reversed text if those layers are visible.  And of
course the stuff on the silkscreen will move to the other side
as well, so if you are in the habit of looking at bottom/bPlace
separately from top/tPlace, it will be pretty obvious (and you
probably should be doing this if you are putting components on
both sides of the board...)

BillW
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist