Hi John 
My plan was to put one function there.
It would check to see who the interruptee was (by looking at the PIRx flag
bits) and then I would make yet another call the appropriate handler.
This is the way I do my low level interrupts.
When I'm in a level interrupt it can be interrupted by another low or a high
.....me thinks.
Are high interrupt ISRs not reentrant? 

 
 
 
 
 
Phillip
Things should be as simple as possible but no simpler
 
 
 
Phillip Coiner
CTO, GPS Source, Inc.
 
 
Your source for quality GNSS Networking Solutions and Design Services, Now!

-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of
John Temples
Sent: Monday, September 18, 2006 7:53 PM
To: Microcontroller discussion list - Public.
Subject: Re: FW: [PIC] Trouble getting my ISR high

On Mon, 18 Sep 2006, Phillip wrote:

> The data sheet does not say you can't have more than one high priority
ISR.

It does say that there is one high priority interrupt vector.  How are
you going to place two ISRs in the same place?

--
John W. Temples, III
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist