> I'm considering the PIC18F8722 which is TQFP80. I'll lay it 
> out to two 
> 40 DIL spaced 1.0" apart, 0.100" pin spacing.
> The ideal pin header for it would be Mill-Max #800-10-064-10-001000, 
> Digikey# ED7264-ND.  You'd need two strips
> of 64 pins to get two strips of 40 pins. Wouter, I'll send you the 
> Gerbers without any company markings before the weekend
> is over. You can get 'em made and I'll buy one.

If you use eagle better send the eagle files.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist