Wouter van Ooijen wrote:
>>> I am thinking of selling some of those adapters, but I am not 
>>> sure what the 'external' pinout should be. DIP-spaces pins on 
>>> 4 edges? Or DIP40-form with an extra row of pins outside and 
>>> parrallel to the DIP40 pins?
>>>       
>
>   
>> http://techref.massmind.org/techref/pcbixmax.htm
>>     
>
> That's a lot of text, but I don't see a preference, or do you mean the
> 4-row edge? Does not sound breadboard-friendly to me.
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
> docent Hogeschool van Utrecht: www.voti.nl/hvu
>  
>
>   
I'm considering the PIC18F8722 which is TQFP80. I'll lay it out to two 
40 DIL spaced 1.0" apart, 0.100" pin spacing.
The ideal pin header for it would be Mill-Max #800-10-064-10-001000, 
Digikey# ED7264-ND.  You'd need two strips
of 64 pins to get two strips of 40 pins. Wouter, I'll send you the 
Gerbers without any company markings before the weekend
is over. You can get 'em made and I'll buy one.

--Bob
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist