In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Peter Van der Zee wrote:

Hi Amit;

Unfortunately this is not a trivial subject, and I don't have much time to donate just now. I've spent over a year getting the results right, so I can't just do this with some "pointers".

Possibly if you were an accomplished assembler programmer; knew the nuances of the SX interrupt inside-out, and had a good multi channel oscilloscope on hand, then I might be inclined to have a go at helping. If this is the situation, please let me know, otherwise, I fear I will be pulling you along all the way, and that will take more time than I care to invest.

My reason for posting my results on this were mainly to let you know that it CAN be done, and if you perservere, you CAN also figure it out.

Cheers,

Peter (pjv)

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=144523#m144691

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)