2006/9/14, Wouter van Ooijen <wouter@voti.nl>:
>
> > My feeling is that anything other than 0.1" DIP would be of
> > limited use.  As Denny intimated, I think it needs to be
> > pluggable into a breadboard (or
> > stripboard) to be of widespread interest.
>
> But a 2x40 DIP style would be almost impossible to remove from a
> breadboard?


I do not think so, particularly if you use a ZIF socket ;-)

Both a 2x40, 4x20 (DIP) and 4x20 (Quad) would fit in a sea-of holes
> breadboard. Only 2x40 would reasonably fit in a stripboard.


-- 
Ariel Rocholl
Madrid, Spain
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist