In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Rsadeika wrote:

Thanks Bean,
I have three more SX52 proto boards left, I checked them out, and they program without any problem. I used the same power supply just to make sure the conditions were the same. The board that is giving me the problem is right out of the anti-static bag, it's brand new. Unfortunately, I did not test the board before I soldered it, I made an assumption that it was just fine. This makes two boards in a row that have now died with some kind of problem, the first one lasted about a month before it died, some kind of Vpp error comes up, and now this one. Either I am having some very bad luck, or ...

When I mentioned headers, that includes four apiece on the Vss, Vdd, and Vin. I will stop here, otherwise I will start sounding like a whiner.

Thanks

Ray

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=144222#m144281

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)