> I've put it up at
> http://www.piclist.com/images/boards/picsquirt/index.htm
:) i see you have converted my gerbers to images too.

>
> The gerbers look ok at first glance, but I couldn't read the drill file.
> What format is that? Maybe Olimex will have better luck, they
> certainly know
> more about that stuff than I do. Please note, Olimex does not
> compensate for
> plate through so your hole sizes need to be just a touch bigger than the
> lead sizes.
I'll talk to the uni PCB facility where previous boards have been fabricated
to see what they do in this regard. as for the drill file format i just used
the default export options in altium.

>
> Is there anywhere people can get a pre-programmed 18F2550 for it?
are you asking for yourself or for making this design public? i could
possiblly supply one but i don't wan't to get into anything large scale.

>
> Any description of what all the stuff in the software archive does? Mouse?
> TargetProg? TargetProgPortB?
the dirs you need are firmware ,USB driver and PC, firmware is the firmware
for the programmer,PC is the PC side software, USB driver is the microchip
USB driver.

the targetprog and targetprogportB dirs are programs i wrote into target
chips to check i could program them.

mouse is an adaptation of the mouse in a circle demo to the picsquirts
hardware (and running without a bootloader) used for early testing.

>
> Documentation for the use of the PC software?
must get arround to writing that, but basically you just pass it a hex file
on the command line.

>
> Lots of questions, sorry, no good deed goes unpunished and this
> looks like a
> good deed indeed.
:)

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist