I've put it up at
http://www.piclist.com/images/boards/picsquirt/index.htm

The gerbers look ok at first glance, but I couldn't read the drill file.
What format is that? Maybe Olimex will have better luck, they certainly know
more about that stuff than I do. Please note, Olimex does not compensate for
plate through so your hole sizes need to be just a touch bigger than the
lead sizes.

Is there anywhere people can get a pre-programmed 18F2550 for it?

Any description of what all the stuff in the software archive does? Mouse?
TargetProg? TargetProgPortB?

Documentation for the use of the PC software?

Lots of questions, sorry, no good deed goes unpunished and this looks like a
good deed indeed.

Thanks!

---
James Newton: PICList webmaster/Admin
mailto:jamesnewton@piclist.com  1-619-652-0593 phone
http://www.piclist.com/member/JMN-EFP-786
PIC/PICList FAQ: http://www.piclist.com


 
 

> -----Original Message-----
> From: piclist-bounces@mit.edu 
> [mailto:piclist-bounces@mit.edu] On Behalf Of peter green
> Sent: 2006 Sep 08, Fri 13:06
> To: piclist@mit.edu
> Subject: [PIC]entering picsquirt into design contest
> 
> some time ago (a few weeks iirc, not sure exactly how long) i 
> mentioned that i would like to enter my picsquirt ( 
> http://www.p10link.net/plugwash/picsquirt/ ) into the piclist 
> design contest.
> 
> i was in uni today sorting out other things (i can only work 
> on the PCB design on the departments computers and its the 
> summer holidays atm) and have tried to export a set of 
> gerbers and a drill file. I have posted them at 
> http://www.p10link.net/plugwash/picsquirt/picsquirt_gerbers.zi
> p  can someone take a look at them and tell me if they seem suitable?
> 
> 
> --
> http://www.piclist.com PIC/SX FAQ & list archive View/change 
> your membership options at 
> http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist