In SX Microcontrollers, SX/B Compiler and SX-Key Tool, originator99 wrote:

Using two different breadboards and the exact schematic as shown here. Although I ran across something in the manual that showed a 10k across the osc pins so I have tried that as well.  When I put in the resonator the center pin goes to GND.  It never causes a problem to program having the resonator in, and the Blitz manual says it doesn't cause problems usually.  I have tried several different 50's and several different 4's.  I always change the FREQ to the frequencey of the resonator, 4m res = FREQ 4m  adn 50m Res= 50m.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=143298#m143421

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)