thanks, Alan,
I have thought of using C, but right now and for this project I have already 
successfully implemented reading the bus, verifying the incomming data, and 
sending it to the LCD.
reading the bus is very time critical and it works perfectly now, so I dont 
want to change to C now.

Also, I think I almost understand addressing the RAM now. have to try it and 
see if I have further questions

Thank you
Lembit

----- Original Message ----- 
From: "Alan B. Pearce" <A.B.Pearce@rl.ac.uk>
To: "Microcontroller discussion list - Public." <piclist@mit.edu>
Sent: Tuesday, September 05, 2006 5:03 PM
Subject: Re: [PIC] MPASM - table write problem 18F4520


> >and yes, I did study the datasheet sections 5.3, 5.4, and I
>>have worked with the instructions and written some program
>>to read the data from the external bus and process it and so on.
>>I just have a hard time to get from the multi page
>>description to a simple code.
>
> Would you be better off using C? have a look at the Microchip C18 
> compiler.
>
> http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en010014&part=SW006011
>
>
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.7/437 - Release Date: 04.09.2006
>
> 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist