I think I have got it: He would like to modify the table declared with DATA.

If that's true, you can't do that. With DATA you create a contant that sits
in the program memory (Flash ROM), so that you have to move it first into
the RAM (does not matter if it's static or dynamic, it's the only RAM you
have inside the PIC). So if you need to modify the text you have to move it
into a temporary space. If you need it for permanent basis, so that you need
that modified data after you switch off your device, you have to put it to
the EEPROM.

Tamas



On 05/09/06, Jan-Erik Soderholm <jan-erik.soderholm@telia.com> wrote:
>
> Lembit Soobik wrote :
>
> > I want to read/write the SRAM, not the EEPROM
> > and not the Flash Memory...
> >
> > Lembit
>
>
> Close to *all* instructions can do that.
> It's not clear what your problem is.
> Could you be more specific ?
>
> Regards,
> Jan-Erik.
>
>
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



-- 
unPIC -- The PIC Disassembler
http://unpic.sourceforge.net
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist