You are right, Jan-Eric,
I have read it now, and even worse, it is not what I intended.
I intended to write and read the static RAM.
I had read 5.3,... and assumed the sample program was using RAM. See how 
little I know :(

Is there a sample code snippet somewhere how to read/write static RAM?

Thank you for your patience
Lembit

----- Original Message ----- 
From: "Jan-Erik Soderholm" <jan-erik.soderholm@telia.com>
To: <piclist@mit.edu>
Sent: Monday, September 04, 2006 7:45 PM
Subject: RE: [PIC] MPASM - table write problem 18F4520


> It's not clear if you have even *read* chap 6.4 and 6.5 in the
> datasheet !!??
>
> Have you read Read 6.5.1 "Flash program memoery write sequence" ????
>
>
>
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.7/436 - Release Date: 01.09.2006
>
> 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist