I could probably get them to do it, but I am sure I will need a few done
along the way and there is only so much they will do as a favour. To pay
for it is almost impossible, being a government institution, and even if
I manage to do it, it would be too expensive.
What I need is an affordable machine shop that I can take my designs to
be manufactured when I require.
Best regards 
            Luis 


-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
Of Alan B. Pearce
Sent: 04 September 2006 11:33
To: Microcontroller discussion list - Public.
Subject: Re: [OT]:Machining

>The mill or lathe is definitely an option in the future when
>I get a house with a garage, but at the moment it's not. I
>don't even no if I could operate it, I'm not very good with
>measuring things accurately...

hey Luis ... working at Culham I'm sure you could get the guys in the
machine shop there to give you advice. You might even get the bits you
want
done as practice pieces by apprentices.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist