Thanks y'all! On Sep 1, 2006, at 5:00 PM, Carey Fisher wrote: > Darren, > > We use Clover Electronics in Newnan, Ga. They do small quantities of > several different products for us and they have a nice through hole > automation line as well as state of the art SMT equipment. They > buy all > parts for us (but will also use parts you supply) and program PICs > also. > > Website: http://www.cloverelectronics.com/ > Contacts: Pat Walker, Tony Walker or Amy Haralson > > Tell them I referred you. > > Carey > -- > > *Carey Fisher, Chief Technical Officer > New Communications Solutions, LLC > *careyfisher@ncsradio.com > Toll Free Phone:888-883-5788 > Local Phone:770-814-0683 > FAX: 888-883-5788 > www.ncsradio.com > > > Darren Gibbs wrote: >> Howdy, >> >> I've developed a (hopefully only for now) low-volume LED-based >> lighting device and am looking make the jump from hand-building >> everything to having some things done offsite, hopefully cutting >> costs a bit. Does anyone have suggestions for an outfit that can >> stuff boards cheaply at low volume (20-100 at a time)? There are two >> boards, an 270 LED array, and a 2 1/2" x 7 1/2" CPU board with 3 PICs >> and various supporting hardware -- no surface mount at this point. >> Any advice much appreciated. >> >> thanks, >> >> darren >> > > > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist