Darren, We use Clover Electronics in Newnan, Ga. They do small quantities of several different products for us and they have a nice through hole automation line as well as state of the art SMT equipment. They buy all parts for us (but will also use parts you supply) and program PICs also. Website: http://www.cloverelectronics.com/ Contacts: Pat Walker, Tony Walker or Amy Haralson Tell them I referred you. Carey -- *Carey Fisher, Chief Technical Officer New Communications Solutions, LLC *careyfisher@ncsradio.com Toll Free Phone:888-883-5788 Local Phone:770-814-0683 FAX: 888-883-5788 www.ncsradio.com Darren Gibbs wrote: > Howdy, > > I've developed a (hopefully only for now) low-volume LED-based > lighting device and am looking make the jump from hand-building > everything to having some things done offsite, hopefully cutting > costs a bit. Does anyone have suggestions for an outfit that can > stuff boards cheaply at low volume (20-100 at a time)? There are two > boards, an 270 LED array, and a 2 1/2" x 7 1/2" CPU board with 3 PICs > and various supporting hardware -- no surface mount at this point. > Any advice much appreciated. > > thanks, > > darren > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist