3.6864MHz can be useful for the 4MHz devices if you don't want to overclock

RP

On 29/08/06, peter green <plugwash@p10link.net> wrote:
> > Besides of the common 4, 10 and 20 Mhz types, I thought
> > I should have som of the ones that makes baudrate
> > calculations (and timer based RTC setups) easier and
> > more accurate.
> well for serial there isn't much point, as long as you are within a couple
> of percent you should be just fine.
>
> as for RTC thats not that hard to do accurately whatever the crystal
> frequency. The trick for accuracy is to just count the ticks and don't try
> resetting the timer.
>
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist