Jan-Erik Soderholm wrote:
> Before I spend to much time searching the net, does
> someone know of a short list with these "odd" values
> that makes time/baudrates more "even", so to say ?

Most of the time I use a high enough speed so that the desired baud rate can
be hit closely enough.  The only "baud rate" crystal frequency I use
regularly is 7.3728MHz.  This happens to be the highest commonly available
crystal to run a PIC 30 with 16x PLL.  The maximum allowed for that would be
7.5MHz, and this is only 1.7% slower.  Using a baud rate multiple is also
more important than it would otherwise be for that application since the PIC
30 doesn't have "high speed" UART mode like a PIC 18 does.  This means a
full speed PIC 18 has better baud rate resolution than a full speed PIC 30.


******************************************************************
Embed Inc, Littleton Massachusetts, (978) 742-9014.  #1 PIC
consultant in 2004 program year.  http://www.embedinc.com/products
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist