Perfect !
Now I'll try to figure out what's "clever"
with each of those values... :-) :-)

Regards,
Jan-Erik.


-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu]On 
Behalf
Of Jinx
Sent: den 28 augusti 2006 12:17
To: Microcontroller discussion list - Public.
Subject: Re: [PIC] 'Odd' crystal freq's.


> Before I spend to much time searching the net, does
> someone know of a short list with these "odd" values
> that makes time/baudrates more "even", so to say ?

9.8304 is a good one. Close to 10MHz (for -10 parts or
for 40MHz PLL). 18.432 or 19.6808 for -20. 4.096 and
4.194304 (if you want to try over-clocking a -04 **),
7.3728, 11.0592, 14.7456, 32.768 etc etc

** not recommended of course. Note that RS have 4.096
for $16 and 4.194304 for $2

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist



-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist