reply to my own mail:
hi list!
does anybody have an hex file for the 16LF876 for mchip icd?
i think tomorrow i will write a source code for a simple test programm 
and an memory test of the device
i had several error messages programming this device with PS+ fw 3.11 on 
mplab 5.70.0 with the hex file pic876.hex which should be for the icd 
and which worked...but with errors..when i enable the device in mplab.

thanks
tobi

mail.deamon@gmx.de schrieb:

>hello list!
>
>i have today got problems with my icd 1 with a 16LF876 chip...
>i used this device a couple times for about 3 years.
>i have first used the orginal firmware with mplab 5.20 and the went to c 
>coding with the ccs pch pcw compiler
>with this software came a "icd-s" firmware and a seperate software. 
>called "Icd.exe". this tool allows me to switch the firmware in the icd 
>chip to 18f oder 16f devices.  last pic i was programming with the icsp 
>was a 16f877(a) and today i wanted to programm a pic18f6720 and made the 
>same thing i ever do. .- switch the firmware to be able to programm the 
>18er series .
>then it happend.  the device hang up and then i think did the 
>mistake..   after the device made the firmware update the software- 
>device sayed "could not find icd check power and cable" ok.- i switched 
>of the icd and powerd on again.
>but i thing i would never see this again.  "Could not connect. No 
>response from ICD, check connection and power to icd"
>
>does anybody had this problem too? how could i solve it?
>
>thank you
>
>tobi
>
>
>  
>

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist