My answers are below.

--- WH Tan <whsiung.my@gmail.com> wrote:

> 2006/8/21, John Chung wrote:
> 
> >     I am trying to program the PIC24FJ128GA010  on
> > the Explorer 16. I still have a problem detecting
> the
> > MCU using my ICD2.
> 
> Sounds like a defective board!?
> 
> But a few questions for you:
> 
> 1) Did the pre-programmed demo application work?
> 
  Yes.

> 2) Have you selected the correct device in MPLAB?
> And the ICD2 OS was
> downloaded?

  I did choose PIC24FJ128GA010 as the device.

> 
> 3) What type of connection you used for ICD?  USB or
> COM?  Did ICD2
> detect other device or board?

  ICD2 was using USB. BTW I did use the same ICD2 to
detect my PIC16F873. No problem with that PIC. ICD2
did not detect any other device. the device Id return
from the PIC24 was 0. The power line were okay. Maybe
I need to do a continuity test btw the RJ-12 and the
chip itself...... 

  The problem is that the demo works but the
programming does not? Any hints?

Thanks,
John
> 
> 
> Best regards,
> 
> -- 
> WH Tan
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist