In SX Microcontrollers, SX/B Compiler and SX-Key Tool, OzStamp wrote:

Hi Bean.
I converted a BS2E program from a customer quickly so code looks accordingly.
(All done free of charge basically to get a sale)
Thanks for the pointer re code I tried something similar but had problems ..( as we are talking about)
So just adjusted the customers code to suit ..

(Omron A6C type 6 pinner device dip top adjust BCD output)
A little BCD dipswitch as above is connected to the pins A0...A3 pulling these pins low.
Or nothing at all just connecting  very short jumper wire to the VSS IDC female socket to the right of them..
So no other stuff at all.
Using the SX Tech board to Proto-type it ( with the SXKEY F)
The application is very price sensitive and the PCB needs to be small 

Parallax OZ disty
Ronald Nollet

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=140402#m140477

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)