Hi:

I would like to be able to use ICD2 for both programming and debugging 
in the 16F88 clock I'm working on without sacrificing 3 pins to ICD2. 
(1) Can I set Vpp/MCLR to internal MCLR and put a N.O. pushbutton switch 
on that I/O pin to gnd and still use ICD2 or must I give up this pin for 
I/O?  (i.e. are the configuration bits related to only uC operation or 
do they have programming and debugging meaning?
(3) If internal MCLR is selected can ICD2 be used in debugging only mode 
(i.e. Vpp will no longer be available)?
(3) On the two (PGC & PCD) communications pins can I put a 100 K 
resistor to +5v and N.O. pushbutton switches to ground and still use ICD2? 

Thanks for any thoughts,

Brooke Clarke

-- 
w/Java http://www.PRC68.com
w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml
http://www.precisionclock.com

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist