Thank you so much for your help. I did find it in the AMP catalog. Regards Rich ----- Original Message ----- From: "Mauricio Jancic" To: "'Microcontroller discussion list - Public.'" Sent: Monday, August 14, 2006 4:13 PM Subject: RE: EE: PLCC44 Pinouts > You can look on the datasheet of the PIC18F4520, for example. > > Mauricio Jancic > Janso Desarrollos > www.janso.com.ar > info@janso.com.ar > (54) 11-4542-3519 > > >> -----Original Message----- >> From: piclist-bounces@mit.edu >> [mailto:piclist-bounces@mit.edu] On Behalf Of Herbert Graf >> Sent: Sunday, August 13, 2006 3:20 PM >> To: Microcontroller discussion list - Public. >> Subject: Re: EE: PLCC44 Pinouts >> >> On Sun, 2006-08-13 at 10:13 -0400, Rich wrote: >> > Hi: >> > I tried to find the pinning configuration and numbering for >> the PLCC44 on the internet. I tried a variety of keywords >> but I could not find it. Does anyone have the numberings >> scheme and pinning for the PLCC44 socket? >> > >> > Rich >> >> Can't give a source off hand, but the numbering is pretty >> much the same as any package (except for the two dimmensional >> pinouts like BGA): >> >> The dot or arrow is pin one. >> Pin numbers increment around the package in the >> anti-clockwise direction, looking down at the top of the package. >> >> TTYL >> >> -- >> http://www.piclist.com PIC/SX FAQ & list archive View/change >> your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> >> > > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist