In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Jimbo wrote:

In my opinion, one advantage to using the SX28 tech board is, if for any reason you fry the SX28 or damage a pin so it doesn't function properly, it is socketed so you just replace the chip and your on your way. Another nice thing about the SX28 is that being a dip chip you can program it and pop it in a socket of a final project that you have built. Unless your  using a pre-made proto board it would be a lot harder to surface mount that chip in a home made circuit. Although I see a lot of advantages to the sx48 proto board I see more  flexability with the SX28 even though it is not as powerfull. Of course for those using mainly proto boards for projects your proto board is a great idea.

Jim W.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=139109#m140272

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)