In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bean wrote:

Cycle times of 1(4) means 1 cycle when using TURBO mode on the DEVICE line (your crazy if you don't) and 4 cycles if your NOT using TURBO.
Note that the SX48 doesn't have a NON-turbo mode, it's ALWAYS in TURBO mode.

Really all instructions are 1 cycle except jumps which are 3 cycles. Now some instructions are compound (are really more than 1 instruction).

Trust me an SX at 50MHz will blow the doors off an Atmel @ 20MHz. And you can run the SX at 75MHz if needed.

Bean.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=139865#m139868

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)