> Waterproof (IP66) switches tend to be used for isolation, so on/off
only - > the nearest I've found is:
> 
> http://www.mastervolt.com/product.asp?ID=1059&rd=ce4N0
> 
> which isn't rotary, but does have three positions: on / off / on and
it's > waterproof!  Not sure if this would be any good to you.  What 
> sort of switching are you doing?  Is it really one to one-of-three?

Basically the central position will be 'off'. The left hand side will
connect a ground on 'circuit 1', turning it to the right will connect
the ground for 'circuit 1' and 'circuit 2'. And this device could be
submerged in a metre of water for several minutes. The currents it will
draw will be at the very most an amp, although it will most probably be
nearer 700mA. The person operating it probably wont be able to see it so
we were after a nice clicky rotary switch with 3 definite positions.

Thanks again

Steve

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist