In SX Microcontrollers, SX/B Compiler and SX-Key Tool, brianbr wrote:

Would that there could be a marraige/hybrid of the SX Tech Board and the great SX48 Proto-board. i strated workin on this montsh ago and then set it aside. But all of Bean's neat new compilers and playtoys have got me playing with the SX48 between bouts of Propellerism.

I sat down thsi afternoon and went over what I liked and what I didn't like about my first effort. I fired up the bandsaw and cut some parts and came up with my 'final solution.' It is simple and easy to do (30 minutes tops) and only one piece of soldering that could be remotely called tricky. All the instructions and some close up pictures are here at this URL
  
   [url]http://www.wulfden.org/SPBU/[/url]

The whole thing takes about $4-5 worth of parts plus a Parallax Breadboard. Many of you should already have the parts on hand. If you do have to order them, the thing that makes it a bear, financially, is unless you can piggy back it on other orders, minimal shipping rates will double the price. Since I have good quantities of the key materials on hand already, if any one is interested in a pre-cut kit of the parts they can scroll down the above webpage and see what I am offering.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=139109

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)