Ahh very good....thanks! Now just need to find a distributor that has the = size I am after. = I also found Hammond has a line as well, just unsure of the price. When = I put the bid for the proto's together, hadnt planned on using a clear lid = but they wanted an LED to be visible. Figure its got to be cheaper for a c= lear lid than an IP65 rated LED assembly. And now I can have other status = LED's visible as well. am Bross wrote: Alan, Check this Bud Enclosure to see if it might work: http://www.budind.com/view.php?part=3Dn4x Bill alan smith wrote: >I'm on the hunt for a clear cover, IP65 (thats washdown proof) 4" x 4" x 3= " or such deep box. Short of Hoffman ($$$$) whats a good source? Initially = needing about 15, then later 1000 so something thats a stock unit is best. > = > Ive checked OKW, Rose..and Mouser and Digikey..who else is a good source? > = > = > Second thing on the same subject of sorts, this is going to be mounted in= a trailer, so vibration is a concern. Anyone had experiance in vibration d= ampening? Potting is not really a good solution but if thats the only thing= .... The board will be mostly surface mount with a couple thru hole relays = (ie..no sockets). > > = >--------------------------------- >How low will we go? Check out Yahoo! Messenger=92s low PC-to-Phone call ra= tes. > = > -- = http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist = --------------------------------- Yahoo! Music Unlimited - Access over 1 million songs.Try it free. = -- = http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist