Hi Stef,

Ian did an article on how to build an Ethernet development board for the
PIC's, you can find the wiring he used at
http://www.piccoder.co.uk/content/view/39/26/

Mat


-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of
Stef Mientki
Sent: 23 July 2006 09:07
To: Microcontroller discussion list - Public.
Subject: [PIC] Ethernet wiring ENC28J60 ?

I just have done some tests with the ENC28J60 and an external loopback wire.
Reading the errata (B2,7 and B4,7) and having trouble receiving my own 
packages,
I discovered that the schematic at page 7 might not be correct.

Because of the errata it's important to choose the right polarity.

On the web I find most wiring schematics (numbers refer to RJ45 connector)
   1 = T-
   2 = T+
   3 = R-
   4 = R+
As most of theses websites are meant for making these cables,
I'm not sure wheter these websites are correct or page 7 of the 
ENC-manual is correct.

Please can someone enlighten me.

thanks,
Stef Mientki

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist